Accessories
Use these accessories to complete your next Bitwise Controls installation.
IR Emitters
PN# IR-EM1 -Single Emitter
PN# IR-EM2 -Dual Emitter
PN# IR-EM1-10 -Single (Ten Pack)
PN# IR-EM2-10 -Dual (Ten Pack)
High quality single or dual IR Emitters for use with our BC1 and BC4X1 controllers. Available individually or in packs of ten.
BC1-IR Input Adapter
PN# ADAPTER-BC1-IR
This adapter provides an optically isolated IR input for our BC1 Automation Controller. It allows external IR distribution systems and RF base stations to trigger BC1 macros.
DB9-RJ45 Adapter
PN# ADAPTER-DB9F/RJ45F -Female DB9 Adapter
PN# ADAPTER-DB9M/RJ45F -Male DB9 Adapter
This adapter (available in Male and Female DB9 configurations) provides a quick and easy way to connect RS232 devices to the screw terminal serial ports on our BC1 and BC4X1 controllers using Cat5 cabling.
BC-IRI IR Receiver
PN# BC-IRI
The BC-IRI is a flexible IR receiver for use with any RS232 enabled host system, such as a PC, Home Automation system, or our own BC4X1. The unit internally decodes NEC and Sony format IR signals, and produces a small, easily-parsed RS232 output on button press and release. You can use our provided IR Codeset (supplied in Pronto Hex format, for use with high-end universal remote control products), or any remote which uses NEC or Sony formats.
Our powerful BC4 Project Editor Software works with the BC-IRI to trigger control macros stored on the BC4X1.
PoE Injector
PN# POE-1
Power over Ethernet injector for our BC4X1 controller. Allows a remotely installed BC4X1 controller to be powered via the network cable.
